updated makefile

module00/ex00/Makefile

@@ -1,50 +1 @@
-# frequency of the CPU (in Hz)
-F_CPU = 16000000UL
-TARGET = main
-CC = avr-gcc
-
-
-all: hex flash
-
-hex: $(TARGET).hex
-
-# avr-gcc : compiler for AVR microcontrollers, https://gcc.gnu.org/wiki/avr-gcc#Using_avr-gcc, https://gcc.gnu.org/onlinedocs/gcc/AVR-Options.html
-#	-mmcu : the target microcontrolle (ATmega328P)
-#	-D : defines a preprocessor macro (#define F_CPU <value>)
-#	-o : output filename
-$(TARGET).bin: $(TARGET).c
-	$(CC) -mmcu=atmega328p -D F_CPU=$(F_CPU) $(TARGET).c -o $(TARGET).bin
-
-
-# avr-objcopy : man avr-jobcopy, https://linux.die.net/man/1/avr-objcopy
-#	-O : specifies output format, Intel HEX
-#		some formats (list not found in any doc) :
-#		-O ihex : Used for flashing AVR chips
-#		-O binary : Raw binary file
-#		-O elf32-avr : Used for debugging
-$(TARGET).hex: $(TARGET).bin
-	avr-objcopy -O ihex $(TARGET).bin $(TARGET).hex
-
-
-# avr-dude : AVR Downloader/UploaDEr, upload firmware, https://avrdudes.github.io/avrdude, v6.3 https://download-mirror.savannah.gnu.org/releases/avrdude/avrdude-doc-6.3.pdf
-#	-p : specifies the microcontroller -> m328p
-#	-c : programmer-id
-#	-b : baud rate for serial communication
-#	-P : the serial port, found with `ls /dev/tty*` -> /dev/ttyUSB0
-#	-U : Uploads (w = write) the HEX firmware file to the flash memory
-#	(-v : verbose info dump)
-flash:
-	avrdude -p m328p -c arduino -b 115200 -P /dev/ttyUSB0 -U flash:w:$(TARGET).hex
-#	avrdude -p m328p -c arduino -b 115200 -P /dev/ttyUSB0 -v
-#	avrdude -p m328p -c arduino -b 115200 -P /dev/ttyUSB0 -U flash:w:../../ressources/dump_atmega328p_ori.hex
-
-
-dump:
-	avrdude -p m328p -c arduino -b 115200 -P /dev/ttyUSB0 -U flash:r:dump_atmega328p.hex
-
-
-clean:
-	rm -f main.hex main.bin
-
-
-.PHONY : all clean hex flash dump
+include ../../Makefile