update macro prescale values
This commit is contained in:
@@ -51,17 +51,13 @@
|
||||
// TIME
|
||||
#define PRESCALE_VALUE 1024 // can be 1, 8, 64, 256, 1024
|
||||
// table 16-5 : prescale sets
|
||||
#if (PRESCALE_VALUE == 1)
|
||||
#define PRESCALE_SET (0<<CS12 | 0<<CS11 | 1<<CS10)
|
||||
#elif (PRESCALE_VALUE == 8)
|
||||
#define PRESCALE_SET (0<<CS12 | 1<<CS11 | 0<<CS10)
|
||||
#elif (PRESCALE_VALUE == 64)
|
||||
#define PRESCALE_SET (0<<CS12 | 1<<CS11 | 1<<CS10)
|
||||
#elif (PRESCALE_VALUE == 256)
|
||||
#define PRESCALE_SET (1<<CS12 | 0<<CS11 | 0<<CS10)
|
||||
#elif (PRESCALE_VALUE == 1024)
|
||||
#define PRESCALE_SET (1<<CS12 | 0<<CS11 | 1<<CS10)
|
||||
#endif
|
||||
#define PRESCALE_SET(value) \
|
||||
((value) == 1 ? (0<<CS12 | 0<<CS11 | 1<<CS10) : \
|
||||
(value) == 8 ? (0<<CS12 | 1<<CS11 | 0<<CS10) : \
|
||||
(value) == 64 ? (0<<CS12 | 1<<CS11 | 1<<CS10) : \
|
||||
(value) == 256 ? (1<<CS12 | 0<<CS11 | 0<<CS10) : \
|
||||
(value) == 1024? (1<<CS12 | 0<<CS11 | 1<<CS10) : \
|
||||
(0<<CS12 | 0<<CS11 | 0<<CS10))
|
||||
#define TIME_MS(ms) (((F_CPU / PRESCALE_VALUE) * ms) / 1000)
|
||||
|
||||
// END MACROS
|
||||
@@ -70,12 +66,12 @@ int main() {
|
||||
MODE_OUTPUT(LED2);
|
||||
CLEAR_ELEM(LED2);
|
||||
|
||||
TCCR1B |= (PRESCALE_SET); // 16.4 : set timer according to prescale value, in register TCCR1B, table 16-5 : prescale sets
|
||||
TCCR1B |= (PRESCALE_SET(PRESCALE_VALUE)); // 16.4 : set timer according to prescale value, in register TCCR1B, table 16-5 : prescale sets
|
||||
|
||||
while(1) {
|
||||
if (TCNT1 >= TIME_MS(500)) { // 16.11.4 : read timer with register TCNT1 (read/write allowed), that combines two 8 bits registers
|
||||
if (TCNT1 >= TIME_MS(500)) { // 16.11.4 : read timer with register TCNT1 (read/write allowed), that combines two 8 bits registers
|
||||
TOGGLE_PIN(LED2);
|
||||
TCNT1 = 0; // reset timer value, also in register TCNT1
|
||||
TCNT1 = 0; // reset timer value, also in register TCNT1
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user