73 lines
2.4 KiB
C
73 lines
2.4 KiB
C
#include <avr/io.h>
|
|
#include <util/delay.h>
|
|
|
|
#include "utils.h"
|
|
#include "bitmanip.h"
|
|
#include "timer.h"
|
|
|
|
#define PERIOD 1000
|
|
#define PRESCALE_VALUE 1024 // can be 1, 8, 64, 256, 1024
|
|
#define DUTY_CYCLE 10
|
|
|
|
#define MAX 100 // max duty cycle percentage
|
|
#define MIN 10 // min duty cycle percentage
|
|
|
|
// Table 16-4 : Waveform Generation Mode Bit Description
|
|
#define CTC_TOP_OCR1A_IN_TCCR1B (0<<WGM13 | 1<<WGM12)
|
|
#define CTC_TOP_OCR1A_IN_TCCR1A (0<<WGM11 | 0<<WGM10)
|
|
#define CTC_TOP_ICR1_IN_TCCR1B (1<<WGM13 | 1<<WGM12)
|
|
#define CTC_TOP_ICR1_IN_TCCR1A (0<<WGM11 | 0<<WGM10)
|
|
#define FAST_PWM_TOP_OCR1A_IN_TCCR1B (1<<WGM13 | 1<<WGM12)
|
|
#define FAST_PWM_TOP_OCR1A_IN_TCCR1A (1<<WGM11 | 1<<WGM10)
|
|
#define FAST_PWM_TOP_ICR1_IN_TCCR1B (1<<WGM13 | 1<<WGM12)
|
|
#define FAST_PWM_TOP_ICR1_IN_TCCR1A (1<<WGM11 | 0<<WGM10)
|
|
|
|
// END MACROS
|
|
|
|
volatile int duty_cycle = DUTY_CYCLE;
|
|
|
|
void increment_duty_cycle() {
|
|
if(duty_cycle < MAX) {
|
|
duty_cycle += 10;
|
|
}
|
|
OCR1A = TIME_MS(PERCENT(duty_cycle, PERIOD), PRESCALE_VALUE);
|
|
}
|
|
|
|
void decrement_duty_cycle() {
|
|
if(duty_cycle > MIN) {
|
|
duty_cycle -= 10;
|
|
}
|
|
OCR1A = TIME_MS(PERCENT(duty_cycle, PERIOD), PRESCALE_VALUE);
|
|
}
|
|
|
|
void on_press(int bit, void (*action)(void)) {
|
|
if ((TEST(PIND, bit)) == 0) {
|
|
action();
|
|
_delay_ms(20);
|
|
while ((TEST(PIND, bit)) == 0) {
|
|
continue;
|
|
}
|
|
_delay_ms(20);
|
|
}
|
|
}
|
|
|
|
// led turns on and off every PERIOD ms using Fast PWM timer, with duty cycle controlled by SW1 and SW2
|
|
int main() {
|
|
MODE_OUTPUT(LED2);
|
|
|
|
TCCR1A |= FAST_PWM_TOP_ICR1_IN_TCCR1A; // Table 16-4 : set timer in Fast PWM (Pulse With Modulation) mode with TOP = ICR1 (Mode 14)
|
|
TCCR1B |= FAST_PWM_TOP_ICR1_IN_TCCR1B;
|
|
|
|
SET(TCCR1A, COM1A1); // Table 16-2 : non-inverting mode, the LED will be ON for DUTY_CYCLE% of the time (CLEAR OC1A on compare match, SET OC1A at BOTTOM)
|
|
|
|
ICR1 = TIME_MS(PERIOD, PRESCALE_VALUE); // Table 16-4 : set the period (compare TOP value)
|
|
|
|
OCR1A = TIME_MS(PERCENT(DUTY_CYCLE, PERIOD), PRESCALE_VALUE); // 16.9.3 : set the duty cycle to DUTY_CYCLE% of the time in channel A -> OC1A (alternate function of PORTB1, aka LED2) is cleared when TCNT1 (the counter value) equals OCR1A
|
|
|
|
TCCR1B |= (PRESCALE_SET(PRESCALE_VALUE)); // start the timer with the prescaler
|
|
|
|
while(1) {
|
|
on_press(SW1, increment_duty_cycle);
|
|
on_press(SW2, decrement_duty_cycle);
|
|
}
|
|
} |