146 lines
5.7 KiB
C
146 lines
5.7 KiB
C
#include <avr/io.h>
|
||
#include <util/delay.h>
|
||
#include <avr/interrupt.h>
|
||
|
||
// mathematics
|
||
#define DIV_ROUND_CLOSEST(n, d) ((((n) < 0) == ((d) < 0)) ? (((n) + (d)/2)/(d)) : (((n) - (d)/2)/(d))) // https://stackoverflow.com/a/18067292
|
||
|
||
// stringify
|
||
#define STRINGIFY_HELPER(x) #x
|
||
#define STRINGIFY(x) STRINGIFY_HELPER(x)
|
||
|
||
// concatenate
|
||
#define CONCAT_HELPER(x, y) x ## y
|
||
#define CONCAT(x, y) CONCAT_HELPER(x, y)
|
||
|
||
// get argument
|
||
#define ARG_1(v1, v2) v1
|
||
#define ARG_2(v1, v2) v2
|
||
#define GET_PORT(args) ARG_1 args
|
||
#define GET_BIT(args) ARG_2 args
|
||
// // version with "LED1 B, D1" without parenthesis
|
||
// #define ARG_1(v1, ...) v1
|
||
// #define ARG_2(v1, v2, ...) v2
|
||
// #define GET_PORT(...) ARG_1(__VA_ARGS__)
|
||
// #define GET_BIT(...) ARG_2(__VA_ARGS__)
|
||
|
||
// actions on registers
|
||
#define SET(register, bit) register |= 1 << bit
|
||
#define CLEAR(register, bit) register &= ~(1 << bit)
|
||
#define TEST(register, bit) (register & 1 << bit)
|
||
#define TOGGLE(register, bit) register ^= 1 << bit
|
||
|
||
// actions on elements
|
||
#define SET_ELEM(elem) SET(CONCAT(PORT, GET_PORT(elem)), GET_BIT(elem))
|
||
// #define SET_ELEM(...) SET(CONCAT(PORT, GET_PORT(__VA_ARGS__)), GET_BIT(__VA_ARGS__)) // version for "LED1 B, D1" without parenthesis
|
||
#define CLEAR_ELEM(elem) CLEAR(CONCAT(PORT, GET_PORT(elem)), GET_BIT(elem))
|
||
#define TEST_ELEM(elem) TEST(CONCAT(PORT, GET_PORT(elem)), GET_BIT(elem))
|
||
#define TOGGLE_ELEM(elem) TOGGLE(CONCAT(PORT, GET_PORT(elem)), GET_BIT(elem))
|
||
#define MODE_OUTPUT(elem) SET(CONCAT(DDR, GET_PORT(elem)), GET_BIT(elem))
|
||
#define MODE_INPUT(elem) CLEAR(CONCAT(DDR, GET_PORT(elem)), GET_BIT(elem))
|
||
#define TOGGLE_PIN(elem) SET(CONCAT(PIN, GET_PORT(elem)), GET_BIT(elem))
|
||
#define TEST_PIN(elem) (TEST(CONCAT(PIN, GET_PORT(elem)), GET_BIT(elem)))
|
||
#define IS_PIN_SET(elem) (TEST_PIN(elem) == 0)
|
||
#define IS_PIN_CLEAR(elem) (TEST_PIN(elem) == 1)
|
||
|
||
// bits
|
||
#define D1 0
|
||
#define D2 1
|
||
#define D3 2
|
||
#define D4 4
|
||
#define SW1 2
|
||
#define SW2 4
|
||
|
||
// elements (port, bit)
|
||
// #define LED1 B, D1
|
||
#define LED1 (B, D1)
|
||
#define LED2 (B, D2)
|
||
#define LED3 (B, D3)
|
||
#define LED4 (B, D4)
|
||
#define BUTTON1 (D, SW1)
|
||
#define BUTTON2 (D, SW2)
|
||
|
||
// USART
|
||
// Table 20-1 : Baud Rate Calculation
|
||
#define USART_BAUDRATE 115200
|
||
#define BAUD_PRESCALER (DIV_ROUND_CLOSEST(F_CPU, (16 * USART_BAUDRATE)) - 1)
|
||
// Table 20-8 : Mode Selection (USART Mode SELect)
|
||
#define ASYNCHRONOUS (0<<UMSEL01 | 0<<UMSEL00)
|
||
#define SYNCHRONOUS (0<<UMSEL01 | 1<<UMSEL00)
|
||
// Table 20-9 : Parity Bit Selection (USART Parity Mode)
|
||
#define PARITY_DISABLED (0<<UPM01 | 0<<UPM00)
|
||
#define PARITY_EVEN (1<<UPM01 | 0<<UPM00)
|
||
#define PARITY_ODD (1<<UPM01 | 1<<UPM00)
|
||
// Table 20-10 : Stop Bit Selection (USART Stop Bit Select)
|
||
#define STOP_ONE_BIT (0<<USBS0)
|
||
#define STOP_TWO_BIT (1<<USBS0)
|
||
// Table 20-11 : Data Bit Selection (USART Character SiZe)
|
||
#define DATA_FIVE_BIT (0<<UCSZ02 | 0<<UCSZ01 | 0<<UCSZ00)
|
||
#define DATA_SIX_BIT (0<<UCSZ02 | 0<<UCSZ01 | 1<<UCSZ00)
|
||
#define DATA_SEVEN_BIT (0<<UCSZ02 | 1<<UCSZ01 | 0<<UCSZ00)
|
||
#define DATA_EIGHT_BIT (0<<UCSZ02 | 1<<UCSZ01 | 1<<UCSZ00)
|
||
#define DATA_NINE_BIT (1<<UCSZ02 | 1<<UCSZ01 | 1<<UCSZ00)
|
||
// 20.11.3 : USART Control and Status Register B (UCSRnB)
|
||
#define RECEIVER_DISABLED (0<<RXEN0)
|
||
#define RECEIVER_ENABLED (1<<RXEN0)
|
||
#define TRANSMITTER_DISABLED (0<<TXEN0)
|
||
#define TRANSMITTER_ENABLED (1<<TXEN0)
|
||
|
||
// TIMER
|
||
#define PERIOD 2000
|
||
#define TIME_MS(ms) (((F_CPU / PRESCALE_VALUE) * ms) / 1000)
|
||
#define PRESCALE_VALUE 1024 // can be 1, 8, 64, 256, 1024
|
||
// table 16-5 : prescale sets
|
||
#define PRESCALE_SET(value) \
|
||
((value) == 1 ? (0<<CS12 | 0<<CS11 | 1<<CS10) : \
|
||
(value) == 8 ? (0<<CS12 | 1<<CS11 | 0<<CS10) : \
|
||
(value) == 64 ? (0<<CS12 | 1<<CS11 | 1<<CS10) : \
|
||
(value) == 256 ? (1<<CS12 | 0<<CS11 | 0<<CS10) : \
|
||
(value) == 1024? (1<<CS12 | 0<<CS11 | 1<<CS10) : \
|
||
(0<<CS12 | 0<<CS11 | 0<<CS10))
|
||
// Table 16-4 : Waveform Generation Mode Bit Description
|
||
#define CTC_TOP_OCR1A_IN_TCCR1B (0<<WGM13 | 1<<WGM12)
|
||
#define CTC_TOP_OCR1A_IN_TCCR1A (0<<WGM11 | 0<<WGM10)
|
||
#define CTC_TOP_ICR1_IN_TCCR1B (1<<WGM13 | 1<<WGM12)
|
||
#define CTC_TOP_ICR1_IN_TCCR1A (0<<WGM11 | 0<<WGM10)
|
||
#define FAST_PWM_TOP_OCR1A_IN_TCCR1B (1<<WGM13 | 1<<WGM12)
|
||
#define FAST_PWM_TOP_OCR1A_IN_TCCR1A (1<<WGM11 | 1<<WGM10)
|
||
#define FAST_PWM_TOP_ICR1_IN_TCCR1B (1<<WGM13 | 1<<WGM12)
|
||
#define FAST_PWM_TOP_ICR1_IN_TCCR1A (1<<WGM11 | 0<<WGM10)
|
||
// 16.11.8 : Timer/Counter1 Interrupt Mask Register
|
||
#define INTERRUPT_ENABLE_CHANNEL_A (1 << OCIE1A)
|
||
#define INTERRUPT_DISABLE_CHANNEL_A (0 << OCIE1A)
|
||
|
||
// END MACROS
|
||
|
||
void uart_init() {
|
||
UBRR0H = (unsigned char) (BAUD_PRESCALER >> 8); // 20.11.5 : UBRRnL and UBRRnH – USART Baud Rate Registers
|
||
UBRR0L = (unsigned char) BAUD_PRESCALER;
|
||
|
||
UCSR0C |= ASYNCHRONOUS | PARITY_DISABLED | STOP_ONE_BIT | DATA_EIGHT_BIT; // 20.11.4 : set Frame Format
|
||
|
||
UCSR0B |= RECEIVER_ENABLED | TRANSMITTER_ENABLED; // 20.11.3 : enable Receiver and/or Transmitter
|
||
}
|
||
|
||
void uart_tx(char c) {
|
||
while (TEST(UCSR0A, UDRE0) == 0); // 20.11.2 : do nothing until UDRn buffer is empty, (UDREn flag in UCSRnA register set to 1 when buffer empty)
|
||
UDR0 = (unsigned char) c; // 20.11.1 : Put data into buffer, UDRn – USART I/O Data Register (read and write)
|
||
}
|
||
|
||
char uart_rx(void) {
|
||
while (TEST(UCSR0A, RXC0) == 0); // 20.11.2 : do nothing until there are unread data in the receive buffer (UDRn), (RXCn flag in UCSRnA register set to 1 when buffer has data)
|
||
return UDR0; // 20.11.1 : get data in buffer, UDRn – USART I/O Data Register (read and write)
|
||
}
|
||
|
||
// send back caracters received on serial port
|
||
// `screen /dev/ttyUSB0 115200`
|
||
int main() {
|
||
uart_init();
|
||
|
||
char received_char;
|
||
while(1) {
|
||
received_char = uart_rx();
|
||
uart_tx(received_char);
|
||
}
|
||
}
|