flash works

README.md

@@ -1,29 +1,76 @@
-# README #
+# RESSOURCES #
 
-This README would normally document whatever steps are necessary to get your application up and running.
+- https://github.com/m3y54m/start-avr/tree/master
+- avrdude 6.3 doc : https://download-mirror.savannah.gnu.org/releases/avrdude/avrdude-doc-6.3.pdf
 
-### What is this repository for? ###
+## ex00 ##
 
-* Quick summary
-* Version
-* [Learn Markdown](https://bitbucket.org/tutorials/markdowndemo)
+avrdude output without flashing :
+```
+avrdude -p m328p -c arduino -b 115200 -P /dev/ttyUSB0 -v
 
-### How do I get set up? ###
+avrdude: Version 6.3-20171130
+         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
+         Copyright (c) 2007-2014 Joerg Wunsch
 
-* Summary of set up
-* Configuration
-* Dependencies
-* Database configuration
-* How to run tests
-* Deployment instructions
+         System wide configuration file is "/etc/avrdude.conf"
+         User configuration file is "/home/hulamy/.avrduderc"
+         User configuration file does not exist or is not a regular file, skipping
 
-### Contribution guidelines ###
+         Using Port                    : /dev/ttyUSB0
+         Using Programmer              : arduino
+         Overriding Baud Rate          : 115200
+         AVR Part                      : ATmega328P
+         Chip Erase delay              : 9000 us
+         PAGEL                         : PD7
+         BS2                           : PC2
+         RESET disposition             : dedicated
+         RETRY pulse                   : SCK
+         serial program mode           : yes
+         parallel program mode         : yes
+         Timeout                       : 200
+         StabDelay                     : 100
+         CmdexeDelay                   : 25
+         SyncLoops                     : 32
+         ByteDelay                     : 0
+         PollIndex                     : 3
+         PollValue                     : 0x53
+         Memory Detail                 :
 
-* Writing tests
-* Code review
-* Other guidelines
+                                  Block Poll               Page                       Polled
+           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
+           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
+           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
+           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
+           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
+           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
+           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
+           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
+           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
+           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
 
-### Who do I talk to? ###
+         Programmer Type : Arduino
+         Description     : Arduino
+         Hardware Version: 3
+         Firmware Version: 4.4
+         Vtarget         : 0.3 V
+         Varef           : 0.3 V
+         Oscillator      : 28.800 kHz
+         SCK period      : 3.3 us
 
-* Repo owner or admin
-* Other community or team contact
+avrdude: AVR device initialized and ready to accept instructions
+
+Reading | ################################################## | 100% 0.00s
+
+avrdude: Device signature = 0x1e950f (probably m328p)
+avrdude: safemode: lfuse reads as 0
+avrdude: safemode: hfuse reads as 0
+avrdude: safemode: efuse reads as 0
+
+avrdude: safemode: lfuse reads as 0
+avrdude: safemode: hfuse reads as 0
+avrdude: safemode: efuse reads as 0
+avrdude: safemode: Fuses OK (E:00, H:00, L:00)
+
+avrdude done.  Thank you.
+```